SERVICES
PROVIDED by Absolute Clarity & Calibration, LLC
for
TOTAL REFURBISH OF
STEREO/STEREO ZOOM MICROSCOPES
Perform
routine setup per ACC procedure
A
trained technician at ACC’s laboratory performs a comprehensive
evaluation.
All
necessary repairs and parts, if needed, will be documented on an internal
work order form.
Quote
on cost of parts and repair labor will be sent to customer either verbally
or in writing as requested.
NO
WORK will be completed until a purchase order number or permission to
perform the work is provided by the customer in writing.
Upon
receipt of customer’s approval to perform work, a full tear down of the
scope is then performed.
Diopter
adjusters and eyepiece adapters are removed, degreased and relubed.
Top
glass dust seals are removed.
Quad-mirror
(or prism) assemblies are removed.
All
internal mechanisms are degreased and relubricated.The internal mechanical assemblies included are zoom cam(s), guide
rods, gearing, pivot bearings, pivot bolts and all contact surfaces between
binocular assemblies and mount.
Synthetic
lubricant is applied where applicable.
All
internal optics are cleaned according to ACC procedure.These internal optics include the quad-mirror and/or prisms, glass
dust seals, lens assemblies, objective lenses and mounts.
After
the microscope has been mechanically refurbished, an evaluation of
parfocality and alignment will be completed according to ACC procedure.
Alignment
throughout the scopes zoom range, parfocality and magnification adjustments
will be made to complete the scopes transformation to like new condition.
Upon
completion of the refurbish work a “serviced” sticker with the
technicians initials, date of service and suggested due date for routine
cleaning and preventative maintenance will be affixed to the scope body.
Absolute
Clarity & Calibration,LLC 109 Main Street ·
Terryville, CT06786
Phone: (860) 583-0502 ·
Fax: (860) 314-1851