TM
Absolute
Clarity & Calibration, LLC
109 Main Street, Terryville, CT 06786
Telephone - (860) 583-0502
E-mail:
jross@absoluteclarity.com
![]() |
SALES | ||||||
| About Us | Optical Calibration |
Optical Repair |
Equipment Serviced |
Preventative Maintenance |
Home | ||
ACC has researched the market place for the
highest quality in all the products we represent. It is our commitment to offer
only the best in workmanship, durability and value to you - the consumer. We are
therefore, pleased to represent the following
| VisionX | Meiji |
| TechniQuip | Old
School Industries |
| ACC's "NEW" Economical Line of Imported Microscope Systems | Metronics |
ACC
also has a large inventory of Refurbished equipment
Brochures and literature available on request.
Click here to complete our inquiry form.
Email: sales@absoluteclarity.com
WHEN BUYING OPTICAL EQUIPMENT - QUALITY IS EVERYTHING!!
If you
are buying new (or used) optical equipment, there are some basic things to check
for that will help determine the general quality of an instrument.
•Feel
the movement of the mechanisms and adjustment knobs...
•A
lack of quality in the machined surfaces will often be obvious
by
the poor feel of the instrument
adjustments.
•No
adjustment should ever be squeaky, scratchy or make any
real noise whatsoever.
•Movement
in the eyepiece tubes and zoom knobs should be
very
smooth but resist change somewhat.
•These
two adjustments are a real telltale factor in the way an
instrument
will hold up over time.
The
Quality of an instrument will carry throughout its life.
The instrument is only as valuable as the materials and care that went
into the design and construction. Please refer to our “Stereo
Microscopes
to Buy and to Avoid” for details on the best choices when shopping for
a microscope. Our opinions come from over 20 years of
optical repair experience. We know
microscopes from the inside out!!!
Your field of view measurements have never been simpler or more accurate
than with VisionGauge. Sub pixel edge detection eliminates operator error and
can be used to capture, manipulate, analyze, store and output images.
VisionGauge uses a Windows based operating system and provides a built-in report
generator which allows you easily produce illustrated reports incorporating
measured data, images and calculations. The package is available with tailor
made reporting for an additional fee. Let VisionGauge work for you!
Photo Documentation System (VG-LT)
Measurement System (VG-ST or CNC)
Laser Profile System (VG-LP)
Hardness Testing (VG-HT)
High-Accuracy
Fully-Automated 3D Measurement Systems
"Cartesian" Systems
VisionGauge OnLine
For unparalleled image
quality on an inspection station - look no further than Meiji.
Meiji offers a wide range of stereoscopic inspection stations and
laboratory quality research microscopes. We at ACC have been involved in the
Meiji line of microscopes for many years and have never seen an unsatisfied
customer. Meiji’s quality vs. value places them at the apex of the
satisfaction scale.
There is no more important component to add to any inspection or measurement device than the correct illumination system. After all, if you can’t correctly see what it is you wish to inspect, even the most expensive system is only so many lenses, bolts and castings. We believe TechniQuip illuminators are the finest in the marketplace today. ACC represents the entire TechniQuip line which includes illumination systems.
Recognized as the industry standard in Digital Readouts. Metronics offers
simple counters to complex PC based measurement readouts. Segmented and full
linear error compensations are available in a variety of products to suit every
need on almost any piece of optical measurement equipment.