SERVICES PROVIDED FOR DYNASCOPE INSTRUMENTS

 Per ACC Proprietary Procedure #MP-DYNCAL and  #NPWI-OPTCLN

·        Perform diagnosis per procedure #SZ-DGS-001.

·        Full cleaning of exterior, stand and lighting equipment.                                     

·        Adjust lamp connectors; substage and epi lighting for best image clarity and brightness.

·        Check bulb sockets for signs of arcing of burnt wiring.

·        Adjust fiber-optic lighting.

·        Clean surfaces of all field lenses.

·        Clean rear viewing mirror and projection mirror.

·        Clean reticle and X10 lenses.

·         Check for motor/disk vibration at highest magnification.

·         Check Filar unit for dirt and ensure smooth operation.

·        (Evaluate, clean; if necessary perform repairs or refurbish at customer request.)

·        Check turret; tighten if necessary.

·        Check photo options; center and focus.

·        Check stage operation; tighten hardware as needed.

·        Check scanning table; perspex tightness (rollers); check force required to move platen.

·        Lubricate mechanical wear surfaces.

·        Filar micrometer calibration verification using ACC masters.

·        Calibrate tube length with NIST standards for field of view filar measurements, such as on the  4 and 5 Series Dynascopes.

·        Calibrate stage linear accuracy and repeatability using ACC masters.

·        Furnish Certificate of Accuracy when applicable.  (Before/After data available.)

·        Furnish written report of any problems found and make specific recommendations as to any part that needs replacing and any action needed to increase machine productivity or  maintain accuracy.

·        ACC glass master stage micrometers calibrated traceable to NIST to .00001”(10 microinches)

·        ACC steel and ceramic master gage blocks calibrated traceable to NIST to .000002” (10 microinches)

·        Seal all non-user adjustable hardware with enamel.

·        All Calibrations conform to ANSI/NCSL Z540-1-1994 and meets ISO requirements.

109 Main Street  **  Terryville, CT 06786